611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com features: ? low insertion loss ? low leakage power circuit protection ? high cw power handling ? hermetically sealed modules ? assorted package styles ? custom designs available peak cw maximum maximum frequency input input flat leakage insertion standard optional range part power power (cw power) loss maximum case case (ghz) number (watts) *(3) (watts) *(2,3) (+dbm) (db) *(1) vswr styles styles 0.02 - 0.1 aclm4885f 100 1 15 0.5 1.7:1 c3 c36,m10,m22 0.1 - 0.2 aclm4769f 100 1 11 0.5 1.7:1 c36 c3,m10,m22 0.02 - 0.5 aclm4594f 100 3 13.5 0.4 1.3:1 c3 c36,m10,m22 0.03 - 1 aclm4675f 100 3 13.5 0.3 1.3:1 c3 c36,m10,m22 0.1 - 1 aclm4786f 100 2 13.5 0.3 1.3:1 c3 c36,m10,m22 0.1 - 2 aclm4800f 100 2 13.5 0.5 1.3:1 c3 c36,c37,m10,m22 0.5 - 2 aclm4650f 100 2 13.5 0.5 1.4:1 c3 c36,c37,m10,m22 1 - 2 aclm4586f 100 2 13.5 0.5 1.3:1 c3 c36,c37,m10,m22 2 - 4 aclm4732f 100 2 13.5 0.6 1.4:1 c3 c36,c37,m22 0.5 - 6 aclm4700f 100 2 13.5 0.8 1.5:1 c3 c36,c37,m22 0.5 - 8 aclm4759f 100 2 13.5 1.0 1.7:1 c3 c36,c37,m22 2 - 8 aclm4504f 100 2 13 0.8 1.5:1 c3 c36,c37,m22 4 - 8 aclm4572f 100 2 13 1.0 1.8:1 c3 c36,c37,m22 0.4 - 12 aclm4727f 100 2 13 1.5 1.8:1 c3 c36,c37,m22 8 - 12 aclm4571f 100 2 13 1.5 1.8:1 c3 c36,c37,m22 1 - 18 aclm4618f 100 2 13 2.4 2.4:1 c36 c37,m22 2 - 18 aclm4619f 100 2 13 2.4 2.2:1 c36 c37,m22 6 - 18 aclm4616f 100 2 13 2.4 2.2:1 c36 c37,m22 8 - 18 aclm4797f 100 2 13 2.4 2.2:1 c36 c37,m22 18 - 26.5 aclm4809f 100 2 15 2.8 2.0:1 c36 c37,m22 notes: 1) cw leakage is measured at 1w input. 2) higher power handling available. contact the factory to discuss specific requirements. 3) power handling is linearly derated from full power at +25c to zero power at +150c. feedback limiters are designed to have lo wer threshold and leakage levels than those of conventional limiters in order to protect more sensitive components. they incorporate input pin diode limiters which are driven by one or more schottky detector diodes. most circui ts include dc blocks, which are required for proper operation. in some very low frequency models, it is not possible to include dc blocks. the application must be such that no low impedance dc path from the center conductor to ground exists outside the unit. the limiter threshold (1db compression) is typically +5dbm. feedback limiters will also handle peak power levels above 100w (1usec pulse width, 0.001 duty cycle, and 1khz repetit ion rate). peak leakages are higher than cw leakages as they are with conventional limiters. this becomes exaggerated at frequencies below 2ghz. pin diode feedback limiters
611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com environmental specifications: screening : mil-e-5400, mil-std-202, mil-e-16400 standard screening : operating temp: -65c to +125c internal visual per mil-std-883, method 2017 storage temp: -65c to +150c temperature cycle: -65c to +100c, 10 cycles humidity: mil-std-202f, m103, cond b op tional high-rel screening (ref mil-prf-38534) : shock: mil-std-202f, m213, cond b internal visual per mil-std-883, method 2017 altitude: mil-std-202f, m105, cond b stabilization bake per mil-std-883, method 1008 vibration : mil-std-202f, m204, cond b temperature cycle per mil-std-883, method 1010 thermal shock: mil-std-202f, m107, cond a c onstant acceleration per mil-std-883, method 2001 temperature cycle: mil-std-202f, m105c, cond d burn-in per mil-std-883, method 1015 leak test per mil-std-883, method 1014 external visual per mil-std-883, method 2009 case style c3 case style c37 case style c36 case style m10 case style m22 part number ordering information: example: aclm4504fc3r1k aclm4504f: feedback limiter, 2 ? 8ghz c3: package type r: reversed connectors (omit for standard configuration) 1k: 1kw peak power handling (omit for standard 100w peak power handling) lmf-0205 sma female (output) sma male (input) ?0.312 1.320.020 ?0.1000.005 thru (2) plcs. sma female input 0.26 0.525 (ref) 1.282.010 0.625 sma female output 0.250 0.48 0.07 0.48 0.250 0.625 1.417 0.530 (ref.) 0.07 sma male input sma female output ?0.100.005 thru (2) plcs. 0.26 0.129 ?0.012 typ. 0.532 input 0.120 0.080 0.246 .003 output 0.250 0.120 0.058 typ. c l output n/c n/c gnd connection 9 10 7 8 6 pin n/c input n/c n/c gnd n/c 5 1 3 4 2 pin connection 0.045 0.085 (0.440 ref.) 0.050 (4) plcs. 0.080 max. 0.005.002 0.270 sq. max. 0.320 0.200 0.015.002 typ. 10 9 8 6 5 3 2 1 4 7
|
